Dillon Powder Dispenser Combo Wrench

Description

This is a small steel laser-cut wrench for manipulating the hex bolts on Dillon Powder Measures. There is a 7/16″ end and a 3/8″ end. This allows you to adjust the powder dispenser bolt with the 7/16″ end, and allows you to remove the powder-bar retaining bolt with the 3/8″ end, if you are swapping between powder bars frequently.

This product is laser cut from 1018 steel, rotary deburred, and then lovingly parkerized or hot dip blued by my own hands.